摘要:NI PXIe-2593为高密度50 Ω RF继电器模块。本模块可编程配置为非终端匹配多路复用器、外部匹配多路复用器或空间灵活的稀疏矩阵。每种配置可处理从直流到高于500 MHz频率的信号。
NI PXIe-2593为高密度50 Ω RF继电器模块。本模块可编程配置为非终端匹配多路复用器、外部匹配多路复用器或空间灵活的稀疏矩阵。每种配置可处理从直流到高于500 MHz频率的信号。本单槽开关模块使用高密度的按钮式MCX连接器,即使是离散电缆仍可方便地管理。NI PXIe-2593适于与高频仪器集成,如:NI PXI-5404频率发生器和NI PXI-5112高速数字化仪。
•16x1多路复用器
•可完全通过软件配置
•150 V, CAT I 切换
•500 MHz带宽
•MCX直接连接
•50 Ω特性阻抗
|
Form Factor
|
PXI / PXI Express |
PXI Bus Type
|
PXI Express
可兼容PXI混合总线 |
Operating System / Target
|
Linux
Windows
实时系统 |
Product Family
|
开关 |
Switch Type
|
分工器
射频(RF) |
Timing / Triggering / Synchronization
|
Synchronization Bus(RTSI)
|
Yes |
T-clock Capability
A patent-pending method for synchronization developed by NI whereby another signal-clock domain is employed to enable alignment of sample clocks and the distribution and reception of triggers. The synchronization of these triggers can be implemented down to pico-seconds.
|
否 |
Triggering
|
數位 |
External Clocking
|
否 |
|
Characteristic Impedance
|
50 Ohm |
Insertion Loss (Typical)
|
0.9 dB |
Isolation (Typical)
|
80 dB |
VSWR Ratio
|
1.4 |
Relay Type
|
機電 |
Multiplexer Configuration
|
Mode (n-wire)
|
1 線式 |
Rows
|
8
16 |
Columns
|
1 |
Banks
|
1
2 |
(责任编辑:rongqe)
|
------分隔线----------------------------